Характеристики и описание
Описание оборудования | |
|---|---|
| KE switch cabinet module 4 inputs (PNP) | |
General specifications | |
| Slave type | A/B slave |
| AS-Interface specification | V3.0 |
| Required master specification | ? V2.0 |
| UL File Number | E223772 |
Indicators/operating means | |
| LED FAULT | Fault display; Red LED red: Communication fault or address is 0 red, flashing: Overload, internal input supply |
| LED INT | Internal input supply active; LED green |
| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
| LED IN | switching state (input); 4 LED yellow |
Electrical specifications | |
| Auxiliary voltage (input) | 12 ... 30 V DC PELV |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Rated operating current | ? 30 mA (without sensors) / max. 180 mA |
| Protection class | III |
| Surge protection | UEXT, Ue: Over voltage category III, safe isolated power supplies (PELV) |
Input | |
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC |
| Supply | from AS-Interface (switch position INT, default settings) or external UEXT (switch position EXT) |
| Voltage | 21 ... 31 V DC (INT) |
| Current loading capacity | ? 150 mA, overload- and short-circuit protected (INT) |
| Input current | ? 9 mA (limited internally) |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Signal delay | < 1 ms (input/AS-Interface) |
Directive conformity | |
| Electromagnetic compatibility | |
Standard conformity | |
| Degree of protection | EN60529:2000 |
| Fieldbus standard | EN62026-2:2013 |
| Input | EN 61131-2:2004 |
| Emitted interference | EN 61000-6-4:2007 |
| AS-Interface | EN62026-2:2013 |
| Noise immunity | EN61000-6-2:2005, EN61326-1:2006, EN62026-2:2013 |
Programming instructions | |
| Profile | S-0.A.0 |
| IO code | 0 |
| ID code | A |
| ID1 code | 7 |
| ID2 code | 0 |
| Data bits (function via AS-Interface) | input output |
| Parameter bits (programmable via AS-i) | function |
Ambient conditions | |
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Relative humidity | 85 % , noncondensing |
| Climatic conditions | For indoor use only |
| Altitude | ? 2000 m above MSL |
| Pollution degree | 2 |
Mechanical specifications | |
| Degree of protection | IP20 |
| Connection | removable terminals rated connection capacity: rigid/flexible (with and without wire-end ferrules): 0.25mm2...2.5mm2 for multiple-wire connection with two wires of equal cross-section: flexible with twin wire-end ferrules: 0.5mm2...1.5mm2 |
| Material | |
Описание оборудования
AS-Interface sensor/actuator module VBA-4E-KE-ZEJQ
Под заказ
Цену уточняйте
Минск ∙
Доставка
Оплата и гарантии