071900 | CIT3APL1N30-STA - фото 1 - id-p93676378

Характеристики и описание

Mechanical values and environment
Housing material	CuZn, nickel-plated
Ambient temperature	0 ... 50 °C
Degree of protection	IP67
Mounting method	Surface
Connection	M12 plug, 8-pin, axial connection The screen on the connection cable is connected to the read head's housing via the knurled nut on the M12 plug connector.
Electrical connection ratings
Operating voltage DC	20 ... 28 V DC All the electrical connections must either be isolated from the mains supply by a safety transformer according to IEC/EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.
Current consumption	110 ... 150 mA
Switching current	-30 ... +30 mA
Type of output	Push-Pull
Resistance	Input resistance 4,5 k?
Output voltage
	For HIGH levelmin.Ub - 3 V DC
	For LOW levelmax.2 V DC
Input voltage
	SKIP input HIGH levelmin.15 V DC
	SKIP input LOW levelmax.2 V DC
Interface, bus
Data interface	4 bit binary coded + strobe
in combination withData carrier CIS3AP50X50SH16YSNOU, CIS3AP50X50SH16YSNOP
Approach speed
At 25°C, read distance s=12mm, center offset m=0mm for 4 hexadecimal digits	max.12 m/min Reduction for each additional hexadecimal digit (at sL = 12 mm and mL = 0 mm) 1.5 m/min
Operating distance
Read distance
At 25°C, center offset m=0mm	7 ... 12 ... 20 mm It is necessary to maintain the minimum distance on the approach of the data carrier from the side if the data must be transferred correctly to the read head in one transmission.
in combination withData carrier CIS3P16D08KH16YSNOU, CIS3P16D08KH16YSNOP
Center offset
At 25°C, read distance s=12mm	-11 ... 11 mm