Характеристики и описание
Nominal voltage | |
|---|---|
| Specific value | 24 VDC |
| Limit values, min/max | 10/30 VDC |
Nominal current, typically | |
| Specific value | 120 mA |
| Condition | unloaded |
Supply | |
| In case of UL / CSA approval | according to NEC Class 2 |
Device design | |
| Type | Single-/Multi-Turn |
| Total resolution | <= 33 Bit |
| Number of steps per revolution | <= 32768 |
| Number of revolutions | <= 256000 |
| Output capacity | <= 32 Bit |
POWERLINK - Interface | |
| POWERLINK | IEC 61784-2, IEC 61158 ff |
| Physical Layer | Fast Ethernet, ISO/IEC 8802-3 |
| Device profile | CoE, CiA DS-406 |
| Communication profile | EPSG DS-301 V1.1.0 |
| POWERLINK Specification | V2.0 |
Transmission rate | |
| Specific value | 100 MBit/s |
| Cycle time | >= 400 µs (Bus) |
| Parameter/Function, changeable | Resolution |
| Node-ID | |
| Scaling parameter | |
| Counting direction | |
| Gear function | |
| Type of parametrization | programmable |
| Programming - Tool | Fieldbus-Device |
| Maximum Speed, mechanically | <= 12000 1/min |
| Shaft load, axial/radial | <= 50 N, <= 100 N |
| Bearing life time | >= 3.9E+10 revolutions |
Bearing life time - Parameter | |
| Speed | 6000 1/min |
| Operating temperature | 60 °C |
| Shaft load, axial/radial | = 60 % |
| Point of origin, shaft load | Mounting flange + 10 mm |
Shaft type | |
| Shaft diameter [mm] | 6 |
| Shaft diameter [mm] | 8 |
| Shaft diameter [mm] | 10 |
| Shaft diameter [mm] | 12 |
| Shaft diameter ["] | 1/4 |
| Shaft diameter ["] | 3/8 |
| Shaft diameter ["] | 1/2 |
| Angular acceleration | <= 10E+4 rad/s² |
| Moment of inertia, typically | 1.3E-6 kg m² |
| Start-up torque, 20 °C | 2 Ncm |
| Mass, typically | 0.3 kg |
Nominal voltage
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-m
Доставка
Оплата и гарантии